
Kieback&Peter · Linear actuator
MD250 is a 2500 N, 24 V actuator for large flanged valves, with 0 to 10 V, 4 to 20 mA, 3-point or 2-point control and position feedback.
Availability and lead time confirmed on your quote
Part numberMD250
The MD250 is a motorised linear actuator with 2500 N of force for the larger Kieback&Peter valves: RK65 to RK100, RF65 to RF100, RD65 to RD100, RGD50 to RGD100, RWG50 to RWG100 and RGDE25 to RGDE100. It runs on 24 V AC or DC and is driven by a continuous 0(2) to 10 V or 0(4) to 20 mA signal, a 3-point signal or a 2-point signal. The signal type is detected and set with DIP switches. The stroke is found automatically at initialisation, up to 50 mm on units made from February 2025 (30 mm before). Running speed is 3.8 s/mm as delivered, or 11 s/mm for quieter, slower control. Position feedback is available as a voltage or current signal and a fault is reported on the same output. A manual mode switch gives Auto, Stop, Close and Open. The MD250-E adds an auxiliary switch module with two floating changeover contacts. They report open, closed, two adjustable positions or a fault and use bistable relays, so the last state is kept after a power cut. Supplied with the Z193 mounting kit when ordered with a valve from the factory.
From the manufacturer's datasheet for MD250.