Loading the page
Thermokon · Room operating unit · BACnet
NOVOS 7 RS485 BACnet
Room operating unit with a 3.5 inch colour display, rotary push button and four favourite keys, with up to four sensors and BACnet MS/TP.
Sign in for trade prices
Availability and lead time confirmed on your quote
Part number780896
Datasheet, PDF
- Quotes answered within 24 hours, no account needed
- DHL, under 15 kg £13.50 ex VAT
- Technical support from the people who commission it
Specification
Communication
- Protocol
- BACnet MS/TP
- Interface
- RS485 BACnet MS/TP
Electrical
- Power supply
- 24 V DC (±10%) or 24 V AC (±10%), SELV
- Power consumption
- Typically 2 W at 24 V DC, 4 VA at 24 V AC
Environment
- Operating temperature
- 0 to +50 °C, humidity up to 85% rH non-condensing
- Protection
- IP30 IP rating
Performance
- Inputs
- 1 input for a floating contact
- Measuring range
- Temperature 0 to +50 °C by default; humidity 0 to 100% rH; CO2 0 to 2000 or 0 to 5000 ppm; VOC mixed gas
- Accuracy
- Temperature ±0.5 K, humidity ±2% between 10 and 90% rH, CO2 ±50 ppm +3% of reading (typical at 21 °C)
- Sensor element
- CO2 with dual channel self calibration; VOC by heated metal oxide semiconductor
Physical
- Housing material
- PC V0
- Colour
- Pure white
- Mounting
- Flush on a 60 mm EU box, or surface mounted flat with adhesive foil or screws
- Dimensions
- 163 x 106 x 28 mm
Part numbers
From the manufacturer's datasheet for NOVOS 7 RS485 BACnet.
Overview
The NOVOS 7 is a room operating unit with a rotary push button and a 3.5 inch TFT display. Four favourite buttons give quick access to functions such as the temperature setpoint, lights and blinds. It also controls fan stages, scenes and presence, and shows measured values and their history. Depending on the part, it has built in sensors for temperature, relative humidity, CO2 and VOC. Absolute humidity, enthalpy and dew point are calculated from the humidity reading. It communicates over RS485 BACnet MS/TP, and has one input for a floating contact. It mounts on a standard 60 mm EU box or surface mounted flat, and the base can be mounted and wired separately. Settings are made with NOVOSapp, uConfig or over the bus.